هذا المُنتج قد لا يكون متوفراً الآن. إضغط هنا لمنتجات مماثلة

Barometric Pressure Sensor Module - BMP085 (Temperature Compensated)

Barometric Pressure Sensor Module - BMP085 (Temperature Compensated)

آخر تحديث منذ 1 سنة

80 ج.م.

Liveغير متوفر
آخر تحديث منذ 1 سنة

## Product Description This is a simple breakout board for the BMP085 originally made by Bosch Sensortech. This is an excellent high-resolution pressure sensor, for measuring a...

ابحث عن منتجات مماثلة

## Product Description This is a simple breakout board for the BMP085 originally made by Bosch Sensortech. This is an excellent high-resolution pressure sensor, for measuring a...

سعر ومواصفات Barometric Pressure Sensor Module - BMP085 (Temperature Compensated)

  • أفضل سعر لـ Barometric Pressure Sensor Module - BMP085 (Temperature Compensated) من فيوتشر إلكترونيكس فى مصر هو 80 ج.م.
  • طرق الدفع المتاحة هى
    دفع عند الاستلام
  • تكلفة التوصيل هى 0-25 ج.م., والتوصيل فى خلال 1-3 أيام
  • أول ظهور لهذا المنتج كان فى يناير 29, 2016

وصف فيوتشر إلكترونيكس

Product Description

This is a simple breakout board for the BMP085 originally made by Bosch Sensortech. This is an excellent high-resolution pressure sensor, for measuring absolute atmospheric pressure. You can use it for measuring barometric pressure as part of a weather station, or as an altimeter (attitude measurements). It's fast enough to handle model rocketry, fast model airplane or UAV.

This digital pressure sensor have a wide barometric pressure range range 30 kPa to 110 kPa with resolution 3 Pascal. It accepts voltage ranging from1.8 to 3.6 Volts. The sensor is designed to be easily connected directly to a micro-controller or arduino via the I²C bus.

The sensor measure also temperature for accurate pressure compensation. Yet you can use it to measure temperature as well ranging from (-40 to +85°C) and accuracy of 2°C.

Wiring Notes

  • Power - wire up 3.3v and ground to the BMP085 . The sensor has separate analog and digital 3.3v pins but you can tie them together.
  • Ideally, the two power pins should be supplied power and filtered separately to prevent digital noise feeding into the analog circuitry.
  • I2C - wire up SCL and SDA, and make sure to use pull up resistors (1K to 20K, most often something like 4.7K) between SDA, SCL and VCC
  • SCL goes to analogue pin 5, SDA to analogue pin4.

Download pressure sensor data sheet

Quickstart Guide

Example Arduino Sketch

Example Code (ATmega328)

مميزات وعيوب Barometric Pressure Sensor Module - BMP085 (Temperature Compensated)

  • لا يوجد تقييمات لهذا المُنتج.