هذا المُنتج قد لا يكون متوفراً الآن. إضغط هنا لمنتجات مماثلة

سعر ومواصفات Arduino Nano 3.0

  • أفضل سعر لـ Arduino Nano 3.0 by تك ديبوت مصر فى مصر هو 95 ج.م.
  • طرق الدفع المتاحة هى
    دفع عند الاستلام
  • تكلفة التوصيل هى 35+ ج.م., والتوصيل فى خلال 2-4 أيام
  • تباع المنتجات المماثلة لـ Arduino Nano 3.0 فى فيوتشر إلكترونيكس, أمازون, جوميا, نون, WayUp Sports مع اسعار تبدأ من 420 ج.م.
  • أول ظهور لهذا المنتج كان فى يوليو 31, 2016

المواصفات الفنية

Weight:45 g

منتجات مماثلة

متجر

طرق الدفع

مدة التوصيل

تكلفة التوصيل

وصف تك ديبوت مصر

Description

Arduino Nano Driver Download page (if not automatically recognised): Click Here For MAC users please check this link 

Arduino Nano got the breadboard-ability of the Boarduino and the Mini USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). This new version 3.0 comes with ATMEGA328 which offer more programming and data memory space. It is two layers. That make it easier to hack and more affordable.

Each of the 14 digital pins on the Arduino Nano can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40 mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:

  • Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the FTDI USB-to-TTL Serial chip.
  • External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
  • PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
  • SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication, which, although provided by the underlying hardware, is not currently included in the Arduino language.
  • LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it’s off.

The Arduino Nano has 8 analog inputs, each of which provide 10 bits of resolution (i.e. 1024 different values). By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference() function. Analog pins 6 and 7 cannot be used as digital pins. Additionally, some pins have specialized functionality:

  • I2C: A4 (SDA) and A5 (SCL). Support I2C (TWI) communication using the Wire library (documentation on the Wiring website).

There are a couple of other pins on the board:

  • AREF. Reference voltage for the analog inputs. Used with analogReference().
  • Reset. Bring this line LOW to reset the microcontroller. Typically used to add a reset button to shields which block the one on the board.

See also the mapping between Arduino pins and ATmega168 ports.

Arduino Nano 3.0 Specifications

MicrocontrollerATmega328
Operating Voltage5 V
Input Voltage (recommended)7-12 V
Input Voltage (limit)6-20 V
Digital I/O Pins14 (of which 6 provide PWM output)
PWM Digital I/O Pins6
Analog Input Pins8
DC Current per I/O Pin40 mA
Flash Memory32 KB
SRAM2 KB
EEPROM1 KB
Clock Speed16 MHz

تاريخ و تحليل سعر Arduino Nano 3.0

  • أرخص سعر لـ Arduino Nano 3.0 فى مصر كان 0 ج.م. من تك ديبوت مصر خلال الـ77 شهور الماضية
  • أغلى سعر لـ Arduino Nano 3.0 فى مصر كان 95 ج.م. من تك ديبوت مصر خلال الـ77 شهور الماضية
  • الاختلاف بين أعلى و أقل سعر لـ Arduino Nano 3.0 فى مصر هو 95 ج.م. من تك ديبوت مصر خلال الـ77 شهور الماضية
  • متوسط السعر لـ Arduino Nano 3.0 فى مصر هو 63.75 ج.م. من تك ديبوت مصر خلال الـ77 شهور الماضية

الأكثر شهرة في مكونات الدوائر الإلكترونيةالمزيد

    مميزات وعيوب Arduino Nano 3.0

    • لا يوجد تقييمات لهذا المُنتج.

    مراجعات Arduino Nano 3.0

    • loading video reviews