Weicon zinc spray application: weicon zinc spray can be used as a good quality rust protection primer, for example, for coating welding and drilling locations, as a conductive intermediate layer during spot welding and wherever metal must be protected against corrosion. In addition to industrial applications, weicon corrosion protection is also suitable as a primer / primer / sealant / adhesive primer / underbody protection / protective varnish for e.g. Cars / exhaust / gutters / fences, etc. Features: weicon zinc spray is tüv tested and provides permanent cathodic corrosion protection for all metal surfaces. It forms a fast drying, firmly adhering protective layer of microfine zinc flakes. Details: heat resistant: 50 degreec to +300 degreec dust dry after 15min fully hardened after 24h abrasion resistant for indoor and outdoor use colour: matt grey / anthracite / adapted to hot dip galvanizing quality: 100% german quality in the salt spray test according to din 53167 and din 50021, metal parts coated with weicon zinc spray showed no corrosion even after more than 550 hours. The zinc flakes form a resistant protective layer even against extreme weather and environmental influences. As a result, weicon zinc spray meets higher requirements than required by din en iso 1461. Surface pre treatment: clean and dry metal surfaces are a prerequisite for perfect application of weicon zing primer. Weicon surface cleaner is suitable for cleaning and degreasing.