With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:
| Longer Range Transmit visually losslessvideo up to 1000ftwith no delay. | | 20MHz Channels Use more than twice as many Bolts in one location or avoid interference like never before. |
| 2 New DFS Channels Operate interference-freemore often in the USA and Europe by making use of two newly introduced DFS channels. | | 20% Smaller Chassis Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed. |
| Individual Identity Easily identify which BoltTX and RX work together with removable colored top plates. | | Rapid Reconnection Reconnect times during a dropped link are now instantaneous once you move back into range. |
| Built-In HDMI to SDI Converter Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device. | | More RobustThan Ever Before Reach your Bolt’s full rangeand potential right out ofthe box with new softwarethat provides the most robust wireless link we’ve ever created. |
Specifications
| Standards | - Technical Specifications:
- Bolt 1000 Transmitter
- Video Input
- 1 x 75 Ohm BNC
- 1 x Type A receptacle HDMI
- Video Output
- 1 x 75 Ohm BNC(Loop-out)
- Video Delay (Tx to Rx)
- <0.001sec (when no video format conversion is enabled)
- Color Sampling
- Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)
- Supported Resolutions
- 1080p60/59.94/50/30/29.97/25/24/23.98
- 1080psf30/29.97/25/24/23.98
- 1080i60/59.94/50
- 720p60/59.94/50
- 480p59.94/576p50 (via HDMI ports only)
- 480i(NTSC)/576i(PAL)
- Wireless
- Up to 1000ft line of sight
- Non-DFS Frequencies:
- US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
- EU & JP: 5.19 ~ 5.23 GHz
- DFS Frequencies:
- US: 5.27 ~ 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 ~ 5.67 GHz
- RF Power
- 19dbm EIRP(with two 5dbi TX antennas)
- Noise Rejection
- Can coexist with WiFi and 5GHz cordless phones
- Audio
- Format Support: 48kHz 24-bit PCM
- Physical
- Dimensions: 0.95"x2.6"x4.47"(24mmx66mmx101.5mm)
- Weight: 8oz(226g)
- Operating temperature:
- Milled Aluminum
- Mountability
- Multiple mounting options with 4-40 holes
- Multiple mounting options with 1/4" hole
- Power
- 2-Pin Lemo 7-28 VDC
- No Internal Battery
- Consumption: 7.5 Watts
- Bolt 1000 Receiver
- Video Output
- 1 x USB 3.0 micro B receptacle
- 1 x 75 Ohm BNC
- 1 x Type A receptacle HDMI"
- Video Delay (Tx to Rx)
- <0.001sec (when no video format conversion is enabled)
- Color Sampling
- Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)
- Supported Resolutions
- 1080p60/59.94/50/30/29.97/25/24/23.98
- 1080psf30/29.97/25/24/23.98
- 1080i60/59.94/50
- 720p60/59.94/50
- 480p59.94/576p50 (via HDMI ports only)
- 480i(NTSC)/576i(PAL)
- Wireless
- Up to 1000ft line of sight
- Non-DFS Frequencies:
- US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
- EU & JP: 5.19 ~ 5.23 GHz
- DFS Frequencies:
- US: 5.27 ~ 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 ~ 5.67 GHz
- RF Power
- 17dbm EIRP(with one 2dbi TX antenna)
- Noise Rejection
- Can coexist with WiFi and 5GHz cordless phones
- Audio
- Format Support: 48kHz 24-bit PCM /li>
- Physical
- Dimensions: 5.5” x 3.5” x 1.0”(139mm x 88.5mm x 25 mm)
- Weight: 13.3oz(376g)
- Mountability
- Multiple mounting options with 4-40 holes
- Multiple mounting options with 1/4" hole
- Interfaces
- OLED display with joystick navigation buttons
- Power
- 2-Pin Lemo 7-28 VDC
- No Internal Battery
- Consumption: 8.5 Watts
|
|---|
decorateTable('product-attribute-specs-table-1')
Wireless Video TX/RX
Teradek Bolt Pro 300 Wireless HD-SDI/HDMI
-
Transmitter: HD-SDI and HDMI input
Receiver: HD-SDI, HDMI, and USB 3.0 output
Learn More
Teradek Bolt Pro 2000 Wireless HD-SDI
-
Transmitter: HD-SDI input
Receiver: HD-SDI output, USB 3.0 output
Supported Video Uncompressed 1080p 60, 4:2:2
Delay: < 1 ms
Transmission Range: 2000 ft (610 m)
Frequency Band:... Learn More
Teradek Bolt Pro 600 Wireless HDMI
-
Transmitter: HDMI input
Receiver: HDMI and USB 3.0 output
Learn More
Teradek Bolt Pro 600 Wireless HD-SDI/HDMI
-
Transmitter: HD-SDI and HDMI input
Receiver: HD-SDI, HDMI, and USB 3.0 output
Transmission Range: 600 ft (182 m)
Learn More
Teradek Bolt Pro 2000 Wireless HDMI
-
Transmitter: HDMI input
Receiver: HDMI output, USB 3.0 output
Supported Video Uncompressed 1080p 60, 4:2:2
Delay: < 1 ms
Transmission Range: 2000 ft (610 m)
Frequency Band: 5 G... Learn More
Teradek Bolt Pro 2000 3G-SDI/HDMI
-
Input / Output Transmitter: 3G-SDI and HDMI input
Receiver: 3G-SDI and HDMI output
Supported Video Up to 1080p60, 4:2:2
Transmission Range: Up to 2000 ft (610 m)
Frequency: 5 GHz
Learn More
Teradek Bolt Pro 600 Wireless HD-SDI
-
Input / Output Transmitter: HD-SDI input
Receiver: HD-SDI and USB 3.0 output
Transmission Range: 600 ft (182 m)
Learn More
decorateList('block-related', 'none-recursive')
//
var $j = jQuery.noConflict();
var index = 0;
$j(document).ready(function(){
$j('ul.mini-products-list').each(function(){
var list = $j(this).find('li.item:gt('+index+')');
if (list.length > 0) {
list.hide();
$j(this).append($j('
(+) See more...').click(function(e){
list.toggle('slow');
$j(this).html($j(this).html() === '(+) See more...' ?
'(-) Less' :
'(+) See more...');
}));
}
});
});
$j('img.imglazy').show().lazyload({
effect : "fadeIn"
});
/yaootaweb-production-ae/media/crawledproductimages/90404be45478a5648d17c44ba674f16b222b0151.jpg)