Tenda TEF1126P-24-410W is a 26-port PoE switch with PoE af/at and SFP power supply. 24 ports 10/100 Mbps PoE 802.3af/at (total 370W) + 1x RJ45 10/100/1000 Mbps + 1xCombo RJ45/SFP 100/1000 Mbps for Uplink. Rackmount, 19 "switch size. 6 kV surge protection. VLAN support.

The package includes a Czech, Slovak and Polish manual.

Technical parameters Standards & Protocols: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af, IEEE802.3at Ports: 24x 10/100Mbps ports RJ45 auto-negation and with PoE support IEEE802.3 at/af PoE standard, 1x RJ45 10/100/1000 Mb/s + 1xCombo RJ45/SFP 100/1000 Mb/s for Uplink Total throughput: 8.8Gbps MAC address table size: 16K Switching mode: Store-And-Forward, Cut-Throught, Wire-speed forwarding LED Indication: 24x RJ45 Line/PoE port activity, 1x PoEmax - max PoE power, 1x Power supply, 1x G1 RJ45 Uplink, 1x G2/SFP2 Uplink PoE power supply: Port 1 to Port 24 support standard IEEE802.3at/af power (maximum power for each port is 30W), PoE power type is end-span (1245+, 3678- line pair), totally 370 Watt for PoE Buffer: 4M Packet forwarding rate: 6.55 Mbps Power supply: 110 to 240 V, AC Consumption: 40 W (without PoE power supply), 410 W (with connected PoE devices max. 370W) Dimensions: 440mm x 284mm x 44mm (L * W * H) Total max PoE power supply: 370W Surge protection: 6,000 V Fans: yes, 2pcs MTBF: 100,000 hours + Working temperature: 0oC ~ 45oC Humidity: 10% -90% RH (non-condensing) Certification: FCC/CE/RoHS

product description Tenda TEF1126P-24-410W switches data using 26 RJ45/SFP ports, 24 10/100 Mbps ports supports PoE802.3af/at + 1x RJ45 10/100/1000 Mbps + 1xCombo RJ45/SFP 100/1000 Mbps s for Uplink. The switch has 6kV overvoltage protection. Store-and-Forward node switching support. 802.3x full-duplex flow control, back-pressure mode half-duplex flow control.

TEF1126P-24-410W is suitable for both small and medium-sized companies and larger households.

CCTV/Standard/VLAN/Extend mode switch Tenda TEF1126P-24-410W includes a switch to select from four modes: CCTV/Standard/VLAN/Extend mode. - CCTV mode: Port1 to Port8 support QoS, it is recommended to connect IP cameras to these ports. - Standart mode: In this mode it works as a classic switch, all ports have auto-negation, all ports communicate with each other, Port1 to Port24 speed 10/100 Mb/s, Port G1 speed 10/100/1000 Mb/s, Port G2/SFP2 speed 100/1000 Mbs. - VLAN mode: In this mode, VLANs are active on each PoE port, ie. each of the PoE ports communicates with only the two Uplink ports, not with the other PoE ports. Prevents large broadcasts and DHCP spoofing. - Extend mode: The speed of PoE ports Port1 to Port8 is max. 10 Mb/s, auto-negation active and the range to the terminal device is increased up to 250m (it also depends on the terminal device, cabling, etc.). Other ports as in Standart mode.

PoE power options - Power over Ethernet Power ports via PoE 802.3af (15.4W) and 802.3at (30W). Max. a total of 370 Watts on 24 PoE ports, use for outdoor and indoor IP cameras, Access Points/Routers, IP phones, etc. Always a total of max. 370 W

Package contents 1x Tend TEF1126P-24-410W 1x Quick installation guide (CZ, SK, PL, EN) 1x Power cable 230V

More information at www.tenda.cz