Tenda TEF1126P-24-250W is a 26-port PoE switch with PoE af/at and SFP power supply. 24 ports 10/100 Mbps PoE 802.3af/at (total 225 W) + 1x RJ45 10/100/1000 Mbps + 1x SFP 100/1000 Mbps for Uplink. Rackmount, 13 "switch size. 6 kV surge protection. VLAN support.

The package includes a Czech, Slovak and Polish manual.

Technical parameters Standards & Protocols: IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at Ports: 24x 10/100Mbps ports RJ45 auto-negation and with PoE support IEEE802.3 at/af PoE standard, 1x RJ45 10/100/1000 Mb/s + 1x SFP 100/1000 Mb/s for Uplink Total throughput: 8.8Gbps MAC address table size: 4K Switching mode: Store-And-Forward, Cut-Throught, Wire-speed forwarding LED Indication: 24x RJ45 Line/PoE port activity, 1x PoEmax - max PoE power, 1x Power supply, 1x G1 RJ45 Uplink, 1x SFP1 Uplink PoE power supply: Port 1 to Port 24 support standard IEEE802.3at/af power (maximum power for each port is 30W), PoE power type is end-span (1245+, 3678- line pair), totally 225 Watt for PoE Power supply: 110 to 240 V, AC Consumption: 25 W (without PoE power supply), 250 W (with connected PoE devices max. 225W) Dimensions: 294mm x 215mm x 44mm (L * W * H) Total max PoE power supply: 225W Surge protection: 6,000 V MTBF: 100,000 hours + Working temperature: 0oC ~ 40oC Humidity: 10% -90% RH (non-condensing) Certification: FCC/CE/RoHS

product description Tenda TEF1126P-24-250W switches data via 26 RJ45/SFP ports, 24 10/100 Mbps ports supports PoE802.3af/at + 1x RJ45 10/100/1000 Mbps + 1x SFP 100/1000 Mbps for Uplink. The switch has 6kV overvoltage protection. Store-and-Forward and Cut-throught node switching support. 802.3x full-duplex flow control, back-pressure mode half-duplex flow control.

TEF1126P-24-250W is suitable for both small and medium-sized companies and households.

CCTV/Standard/VLAN/Extend mode switch Tenda TEF1126P-24-250W includes a switch to select from four modes: CCTV/Standard/VLAN/Extend mode. - CCTV mode: Port1 to Port8 support QoS, it is recommended to connect IP cameras to these ports. - Standart mode: In this mode it works as a classic switch, all ports have auto-negation, all ports communicate with each other, Port1 to Port24 speed 10/100 Mb/s, Port G1 speed 10/100/1000 Mb/s, Port SFP1 speed 100/1000 Mbs. - VLAN mode: In this mode, VLANs are active on each PoE port, ie. each of the PoE ports communicates with only the two Uplink ports, not with the other PoE ports. Prevents large broadcasts and DHCP spoofing. - Extend mode: The speed of PoE ports Port1 to Port8 is max. 10 Mb/s, auto-negation active and the range to the terminal device is increased up to 250m (it also depends on the terminal device, cabling, etc.). Other ports as in Standart mode.

PoE power options - Power over Ethernet Power ports via PoE 802.3af (15.4W) and 802.3at (30W). Max. a total of 225 Watts on 24 PoE ports, use for outdoor and indoor IP cameras, Access Points/Routers, IP phones, etc. Always a total of max. 225 W

Package contents 1x Tend TEF1126P-24-250W 1x Quick installation guide (CZ, SK, PL, EN) 1x Power cable 230V

More information at www.tenda.cz