E10M20-T1: M.2 SSD and 10GbE combo adapter card increases performance

10GbE bandwidth and M.2 SSD cache - all together The Synology E10M20-T1 helps increase I/O performance and bandwidth at the same time by using your Synology NAS single PCIe expansion slot.

HARDWARE

In general

• Host bus interface: PCIe 3.0 x8
• Holder height: Low profile and full height
• Size (height x width x depth): 71.75 mm x 200.05 mm x 17.70 mm
• Operating temperature: 0 ° C to 40 ° C (32 ° F to 104 ° F)
• Storage temperature: -20 ° C to 60 ° C (-5 ° F to 140 ° F)
• Relative humidity: 5% to 95% RH
• Warranty: 5 years (Note: The warranty period begins on the date of purchase indicated on the receipt.)

Storage

• Storage interface: PCIe NVMe
• Supported size: 22110/2280
• Type and number of connectors: M-key, 2 slots

Sew

• IEEE requirements: Ethernet IEEE 802.3an 10 Gbps, IEEE 802.3bz 2.5 Gbps/Ethernet 5 Gbps, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3u Fast Ethernet, IEEE 802.3x flow management
• Data transfer rate: 10 Gbps
• Network operation mode: Full duplex
• Supported features: Jumbo Frame 9 kB; TCP/UDP/IP Checksum Offloading; Automatic negotiation between 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps (Note: DSM requirement: 6.2.3-25426 or later)

Compatibility - Supported models (NVMe SSD)

• SA series: SA3600, SA3400
• Series 20: RS820RP +, RS820 +
• Series 19: DS2419 +, DS1819 +
• Series 18: RS2818RP +, DS3018xs, DS1618 +

More information can be found on the manufacturer website: https://www.synology.com/en-us/products/E10M20-T1