Description

Product SKUs

MBD-X9DRL-3F -O

X9DRL-3F (Standard Retail Pack)

MBD-X9DRL-3F -B

X9DRL-3F (Bulk Pack)

Physical Stats

Form Factor

ATX

Dimensions

12″ x 10″ (30.48cm x 25.4cm)

Processor/Cache

CPU

Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP **) Dual Socket R (LGA 2011)

Cache

Up to 30MB

System Bus

QPI up to 8 GT/s

Note † BIOS version 3.0 or above is required

Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support

System Memory

Memory Capacity

8x 240-pin DDR3 DIMM sockets Up to 512GB DDR3 ECC LRDIMM Up to 256GB DDR3 ECC RDIMM Up to 64GB DDR3 ECC/non-ECC UDIMM

Memory Type

1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs Support ECC and non-ECC UDIMMs

* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.

DIMM Sizes

32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM

Memory Voltage

1.5 V, 1.35 V

Error Detection

Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset

Intel® C606 chipset

SATA

SATA 2.0 3Gb/s with RAID 0, 1, 5, 10 SATA 3.0 6Gb/s with RAID 0, 1, 5, 10

SAS

SAS from C606 RAID 0, 1, 10 support

IPMI

Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC

Network Controllers

Intel® 82574L Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)

Video

Matrox G200eW

Input / Output

SATA

2 SATA 3.0 ports (6Gb/s) 4 SATA 2.0 ports (3Gb/s)

SAS

8 SAS ports

LAN

2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port

USB

9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A)

Video

1 VGA port

Serial Port / Header

2 Fast UART 16550 port / 1 Header

DOM

1 DOM (Disk on Module) power connector

TPM

1 TPM 1.2 20-pin Header

Chassis (Optimized for X9DRL-3F )

2U Chassis

CSE-823TQ-650B CSE-823TQ-653LPB

3U Chassis

CSE-833T-653B

Mid-Tower

CSE-732i-500B

Tower / 4U Rackmount

CSE-842TQ-665B CSE-842TQ-865B

Important Chassis Notes

To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details. Do not support in 1U chassis

Expansion Slots

PCI-Express

3 PCI-E 3.0 x8 1 PCI-E 2.0 x4 (in x8) 1 PCI-E 2.0 x1 1 PCI

System BIOS

BIOS Type

128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1

Management

Software

SuperDoctor® III Watch Dog NMI IPMI 1.5 / 2.0

Power Configurations

ACPI / APM Power Management Power-on mode for AC power recovery

PC Health Monitoring

Voltage

Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator

FAN

8x 4-pin fan headers (up to 8 fans) 8x fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors

Temperature

Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI

LED

CPU / System Overheat LED Suspend static indicator LED UID/Remote UID

Other Features

Chassis intrusion detection Chassis intrusion header RoHS, Halogen Free Dual Cooling Zones

Operating Environment

Operating Temperature Range

10°C – 35°C (50°F – 95°F)

Non-Operating Temperature Range

-40°C – 70°C (-40°F – 158°F)

Operating Relative Humidity Rang