PremiumCord 4K HDMI extender at 100m via one Cat5e/Cat6 cable. The device allows you to transmit an HDMI signal in 4K @ 30Hz or FULL HD 1080p resolution up to 100m via one network cable.

• Supports 4K @ 30Hz resolution, FULL HD 1080p up to 100m
• The HDMI extender consists of a TX transmitter and an RX receiver
• Transmitter and receiver input and output connectors: HDMI female
• Transmitter and receiver connectors: RJ45 female
• A high-quality 1x LAN cable Cat5e, Cat6 or Cat7 is used to connect TX and RX
• 3x3.4 Gbps transfer rate including HDCP support
• Bandwidth: 340MHz
• For resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K @ 30Hz
• The extender transmits HDMI digital video and audio
• The extender must not connect to an active computer network, switch, router, or other active network device. The transmitter and receiver of the extender must be directly connected by a LAN cable, preferably without interruption.
• HDMI input and output cables can be up to 10m long with AWG of these AWG26 cables (AWG26 applies to 7m and 10m cables)
• The transmitter and receiver are powered by the included power adapters 230V/5V, 1A
• The units contain a practical EDID button, after holding the EDID button for a long time, the resolution switches from FULL HD 1080p to 4K @ 30Hz and vice versa
• The transmitter and receiver have signaling LEDs that indicate when the units have connected and signal transmission is in progress.
• The blue LED indicates the power status, during operation this LED flashes red and indicates an active HDMI signal.
• Working temperature: -15 to + 55 ° C
• Dimensions of transmitter and receiver: 81mm x 47mm x 22mm
• Transmitter weight: 102g
• Receiver weight: 103g

Package contains:

• 1x Transmitter unit
• 1x Receiver unit
• 1x manual
• 2x power adapter

For connection, use a continuous Cat5e/Cat6 straight cable with strong copper conductors min. cross section AWG24. Extenders must not be connected to a computer Ethernet network.