PocketWizard MiniTT1 for Canon E-TTL & E-TTL II Systems

650 درهم In stock

The PocketWizard MiniTT1 Radio Slave Transmitter utilizes PocketWizard's new ControlTL firmware platform, is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe. There are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash ... المزيد عند ادفانسيد ميديا

اشتريه من ادفانسيد ميديا
(0)
ابلغ عن خطأ

تفاصيل المنتج

  • أفضل سعر لـ PocketWizard MiniTT1 for Canon E-TTL & E-TTL II Systems من ادفانسيد ميديا فى الإمارات هو 650 درهم
  • طرق الدفع المتاحة هى
    دفع عند الاستلامبطاقة ائتمانية
  • التوصيل فى خلال 1-5 أيام
  • تباع المنتجات المماثلة لـ PocketWizard MiniTT1 for Canon E-TTL & E-TTL II Systems فى ادفانسيد ميديا مع اسعار تبدأ من 250 درهم
  • أول ظهور لهذا المنتج كان فى إبريل 12, 2016
  • من بين المنتجات المماثلة لـ PocketWizard MiniTT1 for Canon E-TTL & E-TTL II Systems أرخص سعر هو 250 درهم من ادفانسيد ميديا

المواصفات الفنية

  • TTL Compatible:

    E-TTL, E-TTL II

  • Antenna:

    Internal

  • Maximum Range:

    30 to 800' (240 m) for E-TTL triggering 30 to 1200' (365 m) for standard triggering

  • Mounting:

    Hot-shoe

  • Ports:

    None

  • Power requirements:

    CR-2450 lithium battery (or CR-2354)

  • Battery Life:

    -

  • Dimensions:

    2.8 x 1.9 x 1.3" (7.1 x 4.9 x 3.3cm) LxWxH

  • Weight:

    2.3 oz (65g)

وصف ادفانسيد ميديا

The PocketWizard MiniTT1 Radio Slave Transmitter utilizes PocketWizard's new ControlTL firmware platform, is part of an ultra-versatile radio slave system, and is dedicated specifically to the Canon E-TTL II flash control system. It simply slides directly into the camera's hot shoe. There are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units. The MiniTT1 is the ideal addition to any Canon E-TTL II flash system. It works in combination with the FlexTT5 Transceiver, and since this system works on digital radio technology, it can support E-TTL around corners, out-of-sight, or in bright sunlight. 2 Channel Settings + Learn Mode Each setting can also be programmed to transmit any of 20 ControlTL channels for TTL photography and 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, Out of the box, the MiniTT1 is programmed for PocketWizard channels 1 and 2. HyperSync & High-Speed Sync Technology Enables X-sync speeds of up to 1/8000 with full-power flash. High-Speed Sync provides auto flash with the camera's shutter speed setting, up to 1/8000th. Unique programming optimizes HSS for better operation and more shots per set of batteries. HyperSync & High-Speed Sync Technology Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs flash system with the camera's shutter speed setting, up to 1/8000th. Built-in Hot Shoe, use with any flash Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional E-TTL II control only. Hot shoe contacts automatically detect dedicated E-TTL or simple hot shoe flash. Reverse Compatible & Basic Triggering Operates on the same channels as all other PocketWizards to work with any unit you may already have. Basic Triggering mode enables standard use with virtually any hot-shoe camera. Low-Profile Design The MiniTT1 lies flat to stay out of the way and uses an internal antenna. Configurable and Upgradeable The MiniTT1 features a mini-USB port, which makes it upgradeable and "future-proof" for continuous improvements and compatibility upgrades. PocketWizard Utility software, available on www.pocketwizard.com enables setting custom functions, adjusting HyperSync timing and setting channels.

Specs

TTL CompatibleE-TTL, E-TTL II
AntennaInternal
Maximum Range30 to 800' (240 m) for E-TTL triggering 30 to 1200' (365 m) for standard triggering
MountingHot-shoe
PortsNone
Power requirements CR-2450 lithium battery (or CR-2354)
Battery Life-
Dimensions2.8 x 1.9 x 1.3" (7.1 x 4.9 x 3.3cm) LxWxH
Weight2.3 oz (65g)
decorateTable('product-attribute-specs-table-1')
PocketWizard MiniTT1 for Canon E-TTL & E-TTL II Systems

تقييمات

    لا يوجد تقييمات لهذا المُنتج.

    منتجات مماثلة

    منتجمتجرسعرطرق الدفعمدة التوصيلرسوم الشحن والتوصيل
    Godox TTL Transmitter   Canon (X1T-C)
    Godox TTL Transmitter Canon (X1T-C)
    متجر:ادفانسيد ميدياسعر: 250 درهمطرق الدفعدفع عند الاستلامبطاقة ائتمانيةمدة التوصيل: 1-5 أيام رسوم التوصيل: غير معروف اشتريه
    Godox TTl Receiver for Canon (X1R-C)
    Godox TTl Receiver for Canon (X1R-C)
    متجر:ادفانسيد ميدياسعر: 250 درهمطرق الدفعدفع عند الاستلامبطاقة ائتمانيةمدة التوصيل: 1-5 أيام رسوم التوصيل: غير معروف اشتريه
    PocketWizard MiniTT1 for Nikon i-TTL System
    PocketWizard MiniTT1 for Nikon i-TTL System
    متجر:ادفانسيد ميدياسعر: 650 درهمطرق الدفعدفع عند الاستلامبطاقة ائتمانيةمدة التوصيل: 1-5 أيام رسوم التوصيل: غير معروف اشتريه
    PocketWizard FlexTT5 for Canon
    PocketWizard FlexTT5 for Canon
    متجر:ادفانسيد ميدياسعر: 735 درهمطرق الدفعدفع عند الاستلامبطاقة ائتمانيةمدة التوصيل: 1-5 أيام رسوم التوصيل: غير معروف اشتريه
    PocketWizard MiniTT1 for Canon E-TTL & E-TTL II SystemsPocketWizard MiniTT1 for Canon E-TTL & E-TTL II Systems






    ... أوأضف الى قائمة مفضلة جديدة.