iGET SECURITY EP4 - Wireless magnetic sensor for doors/windows Wireless magnetic sensor designed to detect the opening of doors and windows, for the iGET SECURITY M5 alarm. He will warn you if we forget to close the window/door when leaving. Tamper protection, highest 256bit transmission security, very long battery life of 5 years, alarm constantly monitors the activity of this sensor, as well as the signal, battery percentage and more.

A sensor that mounts to door and window frames. The second part of the sensor then directly on the doors and windows. When these two parts are 1 cm apart, detection occurs. The sensor also monitors the condition of the doors/windows, thus alerting you when the alarm activates which windows and doors remain open. Processing in a modern design, low energy consumption. Easy pairing to the basic alarm set using a QR code. Location distance from the main unit up to 1 km. Indoor use.

Main parameters: - sensor, where it is necessary to guard by opening the magnetic contact, ie. reacts when doors, windows, etc. are opened, - detection based on the separation of two magnetically interconnected parts, one part is located on the door/window frame and the other part on the door/window, as soon as it is more than 1 cm apart, the contact opens and an alarm signal is sent, - this detector also knows what state the window/door is in - ie. whether the window/door is open or closed right now. When the alarm is activated when leaving the object, it notifies the alarm by notifying the application or by SMS which window/door has remained open and it is possible to choose whether or not it should remain so. - Example of notification of an application or SMS when a forgotten open door window: "The following sensors are still disconnected, really change the alarm status? Children Room Window, Garden Door." - simple extension of the basic alarm set, just scan the QR code on the sensor, - contains a signaling LED diode - lights up when opening is detected, still lights up when the battery is low, also serves as a test button, - highest 256bit wireless encryption - battery life up to 5 years depending on the number of openings, - sensor distance from the main unit up to 1 km, - the iGET M5 alarm still checks if this sensor is available, also the signal strength and the% of the battery in the sensor, - setting options: immediate alarm, delay, Home mode, Welcome Gong, - thick double-sided tape included for easy attachment, - concealed mounting holes in the sensor and magnet for mounting with screws.

Specifications: Transmission frequency: 868.35 MHz Operating temperature: - 10 ° C ~ + 50 ° C Operating humidity: up to 90% (no condensation) Battery life: up to 5 years Power supply: 1x 3V battery, type CR123A Operating current: up to 100 mA Quiescent current: 0.015 mA Contact opening: at a distance of 1 cm or more Signal range to the central unit: up to 1 km in direct line of sight Sensor weight: 39g including battery Sensor dimensions (length x width x depth): 84 x 26 x 22.5 mm Magnet dimensions (length x width x depth): 34 x 11 x 9.5 mm

More information at www.iget.eu