Wireless indoor siren powered by 3 AA batteries or microUSB port. Designed for iGET SECURITY M4 alarm. It contains batteries for up to 18 months of operation, a volume of 80dB, a choice of several tones and volume settings. Sabotage protection. Location distance from the main unit up to 200 m. Indication of the status in which the alarm is located. When the battery is low, it informs the alarm via the application/SMS.
Main parameters: - thanks to the internal 3 AA batteries, no power supply is required, - it is also possible to power via microUSB port, - the internal siren is designed for all places where we also want to trigger an alarm, not only in the place of the main unit, - the main advantage of using this siren is that we can turn off the siren in the main alarm unit and store the alarm more against damage, - in the event of an alarm, it emits an emergency tone of 80 dB, at the same time the bright red LEDs on the siren light up, - simple extension of the basic alarm set, - contains protection against sabotage, - the siren is stably powered from the inserted 3 AA batteries or from the mains adapter via the microUSB port. The adapter is not included. It is possible to use both, and if the main power supply is disconnected, the siren is still active.
Specifications: Operating temperature: - 10 ° C ~ + 40 ° C Operating humidity: up to 90% (no condensation) Operating current: up to 0.02 mA Maximum current: 350 mA Siren volume: 80dB (30 cm) Battery: 3x AA Battery life: up to 18 months Supply voltage: power adapter output 5V DC 1A (not included) Signal range to the central unit: up to 200 m in direct line of sight Siren weight: 115g without batteries, 184g including batteries Siren dimensions (length x width x depth): 108 x 86 x 28 mm
More information at www.iget.eu