This HUB offers 7 USB 3.0 ports with Plug & Play and standard USB charging - the HUB automatically detects whether a USB charging device is connected. Because the HUB has 7 USB 3.0 ports, up to 7 devices can be charged at a time. The USB 3.0 interface is especially important for data transfers from USB 3.0 memory cards and flash drives, where its high bit rate is most used. An external power adapter is included in the package to guarantee stable charging from USB ports and HUB performance, providing up to 10W charging power per port.

The HUB does not require driver installation, just connect it to your computer by using the USB cable and you can use it immediately. The HUB has built-in surge protection for your computer in the event of a short circuit on peripheral devices. Of course, backward compatibility with USB 2.0/1.1 is a must.

The HUB is installed automatically from the system and does not require any drivers. Connect the AC adapter connector to the HUB and the AC adapter to a 230V outlet. Then, connect the HUB via a USB cable to a free USB port (USB 3.0, 2.0 or 1.1) on your laptop/PC and follow the instructions on the screen. The HUB will be installed and displayed in Device Manager as "General USB Hub" and "General USB SuperSpeed Hub".

Specifications • 7x USB 3.0 port for USB device connection • 1x USB 3.0 port for HUB connection to notebook/PC • Charging power of USB ports up to 10 W • 36 W Power Adapter • Transmission speed up to 5 Gbps • USB charging detection mechanism for mobile devices • Plug & Play features • Surge and overcurrent protection • LEDs • Operating temperature 0-50 ° C • AC adapter: AC 100-240 V, 50-60 Hz, 1.3 A; DC 12 V, 3 A output • Windows XP, Vista, 7 32/64bit, 8 32/64bit, 8.1 32/64bit, 10 32/64bit, macOS 10.x or higher • Product dimensions 115 x 53 x 24 mm • Product weight 125 g • Packaging dimensions: 139 x 117 x 55 mm • Packaging weight: 250g

Package contents • i-tec USB 3.0 Charging HUB 7port • USB 3.0 data cable from A to B (100 cm) • 36 W power adapter (150 cm cable) • User Manual

SYSTEM REQUIREMENTS • Hardware requirements: Notebook or PC with free USB port • Operating system: Windows XP/Vista/7/8/8.1/10, macOS 10.6 and higher, Linux, ChromeOS