CreatBot DX Plus - Dual Extruder

If Size matters  -   Build Volume 300 x 250 x 520 mm!

This solid constructed 3D Printer has dual print heads, semi enclosed chamber with see through walls, a heated glass print bed and a Bowden style extruder. The extruder has the stepper motors positioned at the back of the machine which results in a light weight print head assembly enabling high speed 3D Printing. The CreatBot DX prints beautifully in PLA and ABS as well as other filaments including soluble HIPS and PVA. A great machine for engineering and education, stacking up multiple objects for production work, large architectural models, sculpture, jigs and fixtures.

The Creatbot can be controlled, thanks to the open source functionality, with the in-house software (Cura based), or with any other commonly used software. The easiest way to controll the print job is on the supplied SD card.Highlights

Large build volume of 300 x 250 x 520 mmAll metal chassisSmart adjustable extruderAutomatically shutdownMulti-function keypadGear motors feederCeramic panel hot bedMetal hot bed trayHigh resolutionFilament detection systemPrint in temperatures up to 400Continued print in case of power lossAll enclosed build space

All metal chassis

A 3D printer requires a certain weight to insure stable operation. This is why a all metal chassis is the best way to go when it comes to 3D printing.Large build volumeThe DX Plus boasts with its impressive build volume of 300 x 250 x 520 mm, that is more than enough for most makers. This means that you can print your creations in 52 cm height and with a resolution of 0.04 mm.

Smart adjustable extruder

CreatBot extruders have an intelligent cooling system, this ensures that the filament is feeding at the optimal temperature all the time. The height adjustable nozzles allows you to align your two nozzles very quick and easy. Perfect when you want to print with support, different material or just two colors. All CreatBots from 3D Prima comes with dual extruders as standard.

Automatically shutdown

Your CreatBot is equipped with a power management module. When the print is finished and there is no action taken within 5 minutes the printer will shut down. Very useful and very energy efficient.

Continued printIf you should have an unexpected power loss the printer remembers the last known position, stores it, lowers and retract the filament. When the power comes back on you can continue to print. Multi-function key padCreatBot has a multi-function keyboard. This makes for very easy handling and direct access to many of the most used functions, including Z shaft up/down, heating/cooling of hot bed, pause, resume print, browse the SD card and more.

Gear motors feeder

A gear motor can produce more torque compared to the general stepper motor, this ensures that there is a smooth feeding of the filament at all times and that retraction is perfect.Filament detection systemIf you should run out of filament during a print, don’t worry. The printer will go into pause mode and let you change the filament – then you just hit resume, easy! 

Ceramic panel hot bed

On top of a silica heating plate there is a stunning ceramic hot bed which is more expensive then glass but also provides a better heating distribution and a more even heat. The ceramic plate is very smooth and provides a very good adhesion.

High temperature printsThe nozzles can operate in temperatures up to 400 degrees Celsius. This means that you can use a wide range of different filaments. It also provides you with a very stable temperature during printing.

Metal hot bed tray

An all metal hot bed tray makes for a very stable print platform which in turn improves stability.All enclosed build spaceOn the CreatBot you have a totally enclosed build space which prevents large prints from being cracked or warped.

In the boxCreatBot DX Plus with dual extruders1 x SD card1 x USB cable1 x Power cable1 x Tool kit1 x Manual2 x spools of 1 kg 3.00 mm filamentSoftware on SD card

Machine Parameters

Printing technologyFFF -Fused Filament FabricationExtruders2 Dual ExtrudersBuild volume300*250*520mmLayer resolution0.04 mmPrint speedUp to 120 mm/sPosition precisionXYZ Axis 0.01 mmLCD DisplayYes, with key boardOperating nozzle temperatureMAX 400° CPlatform temperatureMAX 120 ° CSupported materialsPLA, ABS, HIPS, PVA, PETG, Woodfill and othersFilament diameter2.85 mmConnectionsUSB and SD cardChassiAll steelSoftware includedCreatBot multi-language version / Cura VersionFile formatSTL, OBJ, GCode, AmfProduct Dimension420*380*790mmNozzle diameter0.4 mmSupported OSWindows, Linux, Mac OS, OSXWeight35KgShipping weight55Kg

JadoPado is a great place to buy the CreatBot DX Plus - Dual Extruder Large Volume 3D Printer in Dubai, Abu Dhabi, Sharjah, UAE. With awesome customer support, easy returns and really fast deliveries, there are a bunch of reasons why our customers keep coming back!